Watlow 12LS Controller - Manual (Page 85)

4-52
YES Change current setpoint setting.
Lower display SP =xxxx
UP/DOWN Changes setpoint value.
ENTER Stores new segment setpoint. Display
advances to Edit Segment Events.
BACK Returns to Edit Segment Number.
NO Leave segment setpoint as it is. Display
advances to Edit Segment Events.
BACK Returns to Edit Segment Number.
4.7.10 EDIT SEGMENT EVENTS
From this menu event outputs for the current segment may be defined. Each segment may have up
to four event outputs defined. These outputs are activated when the segment reaches completion.
Any number of the four events may be used and the default state for each is NO (no assignment).
Each event has an associated output number (all 9 outputs are available for assignment) and an
active state (ON or OFF).
|-----------------|
Display: ¦ x SEGMENT yy ¦
¦ EDIT SEG EVENTS?¦
|-----------------|
The ? flashes.
x is the profile designator [A-L].
yy is the segment number [1-20].
YES To edit events for the current segment.
NO Skip event editing. Display advances to Edit Segment Triggers.
BACK Return to Edit Segment Number.
4.7.11 EDIT EVENT OUTPUT NUMBER
|---------------|
Display: ¦ a SEGbb EVENTc¦
¦ OUTPUT NR ? dd¦
|---------------|
The ? flashes.
a is the profile designator [A-L].
bb is the segment number [1-20].
c is the event number [1-4].
dd is the output number assigned to this event [1-9,
NO for no assignment]