Watlow 12LS Controller - Manual (Page 88)

4-55
YES Edit input number assigned to this trigger.
Lower display DIN = xx
UP/DOWN Select input number or delete
assignment.
ENTER Assign input number to current trigger.
If a pin number is assigned the display
advances to Edit Trigger Active State. If
NO is entered, the display advances to
the next trigger.
BACK Return to Edit Segment Triggers.
NO Leave input assignment for this trigger
as it is. If the trigger is assigned the
display advances to Edit Trigger Active
State. Otherwise the display advances to
edit the next trigger.
BACK Return to Edit Segment Triggers.
4.7.15 EDIT TRIGGER ACTIVE STATE
|-----------------|
Display: ¦ a SEGbbTRcDIdd ¦
¦ ACTIVE STATE?eee¦
|-----------------|
The ? flashes.
a is the profile designator [A-L].
bb is the segment number [1-20].
c is the trigger number [1 or 2].
dd is the assigned input number [1-8].
eee is the True state for the input [ON/OFF]
YES Change TRUE state of this trigger.
Lower display DIxx=yyy
UP/DOWN Select input state [ON/OFF].
ENTER Assign TRUE state for this trigger. Display advances to Edit
Trigger Latch Status.
BACK Return to Edit Segment Triggers.
NO Leave input state assignment for this trigger as it is. Display
advances to Edit Trigger Latch Status.
BACK Return to Edit Segment Triggers.