Watlow 12LS Controller - Manual (Page 47)

4-14
The menu appears as:
|----------------|
¦SAVE CURRENT ¦
¦SETUP TO JOB ? x¦
|----------------|
When this menu is first displayed the job number will be the number of the last job file selected, or 1 by default.
Press YES to select the menu or NO to advance to the next menu.
Press UP and DOWN to select the job number.
Press ENTER to store current setup to the selected job file or press BACK to return to the SETUP GLOBAL
PARAMETERS main menu heading.
4.5.1.2 RESTORING A JOB SETUP
Any one of 8 saved jobs may be loaded for operation from memory. The parameters loaded into memory when a job
is loaded are the same as those listed above under Storing Job Setup. All existing data will be overwritten. The display
will appear as :
|----------------|
¦LOAD CURRENT ¦
¦SETUP FM JOB ? x¦
|----------------|
When this menu is first displayed the job number will be the number of the last job selected, or 1 by default.
Press YES to select the menu or NO to advance to the next menu.
Press UP and DOWN to select the job number.
Press ENTER to load the current setup from the selected job file or press BACK to return to the SETUP GLOBAL
PARAMETERS main menu heading.
4.5.1.3 SETTING THE ALARM DELAY
This menu is used to set a startup delay for all system alarms. Alarm checking will be delayed for the number of
minutes entered [0 to 60]. This is used to avoid nuisance alarms when starting up a system. The display will appear as :
|----------------|
¦ ALARM DELAY ¦
¦ ? xx MINUTE(S)¦
|----------------|
Press YES to select the menu or NO to advance to the next menu.
Press UP and DOWN to adjust the number of minutes desired.