Watlow 12LS Controller - Manual (Page 86)

4-53
YES Change the output assigned to this event.
Lower display DOUT= xx
UP/DOWN Select output number. [1-30, NO].
ENTER Assign output number to this event.
Display advances to Edit Event State.
BACK Return to Edit Segment Events.
NO If an output is assigned to the current
event the display advances to Edit Event
State. If no output number is assigned
the display advances to next event
number. [1-4 and wraps around].
BACK Return to Edit Segment Events.
4.7.12 EDIT EVENT OUTPUT STATE
|-----------------|
Display: ¦ a SEGbbEVc DOdd ¦
¦ ACTIVE STATE?eee¦
|-----------------|
The ? flashes.
a is the profile designator [A-L].
bb is the segment number [1-20].
c is the event number [1-4].
dd is the output number assigned to this event [1-9]
eee is the output active state [ON or OFF]
YES Change the active state of this event.
Lower display DOxx=yyy
UP/DOWN Select output state. [ON, OFF].
ENTER Assign active state to this event. Display
returns to Edit Event Output Number for
the next event number.
BACK Return to Edit Segment Events.
NO Leave current active state as it is.
Display returns to Edit Event Output
Number for the next event number. [1-4
and wraps around].
BACK Return to Edit Segment Events.