Mch control sub-menu – Proface APL3000B - Node Box PC User Manual
Page 78
Chapter 4 System Setup
4-19
Thermal Control Circuit
This is a function that protects the CPU’s temperature, and its setting is a situation that if it exceeds the limit
that CPU is able to work properly. Select from [Disabled], [TM1], or [TM2]. The factory default setting is
[TM2] and the default should be applied.
MCH Control Sub-Menu
Point the cursor to the [MCH Control Sub-Menu] on the [Intel] screen and press the [Enter] key, so that the
following screen will be displayed.
MCH Power Management Sub-Menu
Goes to the Chipset set-up screen.
DDR ECC Operation
Specifies whether you use ECC memory or not. The choice is [Enabled] or [Disabled] and the default factory
setting is [Enabled].
SEE