Setting up the server pc – Proface APL3000B - Node Box PC User Manual
Page 125
PS-3650A / PS-3651A User Manual
6-24
Setting Up the Server PC
(1)
On the server PC, download the software from the Pro-face support site “Otasuke Pro!”. Follow the
attached instructions to copy the downloaded file to the designated file.
(2)
Start up the Pro-Studio.
(3)
Register the PS-A you want to include in the network to the network station, and edit the participant
stations.
(4)
Select [PL, PS-A, PS-B] for the PLC type on the network station editing.
(5)
Register the symbol. Refer to the following for the symbols that can be registered.
SEE
Pro-Server with Pro-Studio for Windows Operation Manual
Pro-Server EX Reference Manual
•
When using the Pro-studio’s [Find Stations] command to register the PS-A to the network station,
the System Monitor should be activated with the Remote RAS feature enabled in the PS-A.
SEE
List of Device Addresses (page6-21)
•
You are not required to transfer the network project file created with the Pro-Studio to the client PS-A.