2 setup procedure, 2 setup procedure -26 – Proface APL3000B - Node Box PC User Manual
Page 127
PS-3650A / PS-3651A User Manual
6-26
6.7.2
Setup Procedure
(1)
Execute the application on the server as well as on the PS-A.
The application is stored in the following folder.
(2)
Check the IP address of LAN2 on the PS-A.
(3)
Shut down the OS of the PS-A. Make sure to keep the power supply to the PS-A.
(4)
Send MagicPacket from the server to the IP address of the PS-A checked in (2). Select the IP address to
which you want to send the MagicPacket, right-click on the mouse, and select [Boot].
(5)
The PS-A starts up.
Starting/Shutting Down the PS-A from the Standby or Sleep Mode
To start/shut down the PS-A from the standby or sleep mode, configuration of the [System] setting in the
[Control Panel] is required.
(1)
Start [Control Panel] from the Start menu.
(2)
Start the [System]. (You can find [System] in the Performance and Maintenance category.)
(3)
Start the [Device Manager] on the Hardware tab.
(4)
Double-click on [Realtek RTL8169/8110 Family] on the Network tab.
(5)
Put a checkmark to the [Allow this device to bring the computer out of standby] box on the Power Man-
agement tab.
Application Name
File Name
Folder (Same for both Windows
®
XP and
Windows
®
2000)
Server
Remote Shutdown
RSSvr.exe
C:\Proface\Shutdown\Server
PS-A
Remote Shutdown
RSClt.exe
C:\Proface\Shutdown\Client
•
•
Download [Remote Shutdown], a tool to send the MagicPacket from the Pro-face support site
“Otasuke Pro!”.
•
To start/shut down the PS-A from the shut-down mode, it is not necessary to configure the
[System] setting in the [Control Panel].