Proface APL3000B - Node Box PC - Manual (Page 28)

Chapter 2 Specifications
2-5
2.2 Performance Specifications
2.2.1 Performance Specifications
PS-3650A PS-3651A
CPU Intel Celeron M320 (1.3GHz) Intel ULV CeleronM (600MHz)
L2 Cache Memory 512KB (Built in the CPU)
Main Memory S.O DIMM socket 256 to 1GB (PC2700)
BIOS FirstBIOS Embedded Pro (Phoenix Technologies Co.)
Graphics XGA (1024 × 768 dots)
Video Memory 8 to 64MB (UMA method)
Interface
Serial
Interface
COM1: RS-232C
Corresponding to IEA-232
Connector: D-SUB 9 pin (plug) (5V/RI switching available)
Network
Interface
Ethernet 2 ports
(Corresponding to IEEE802.3, 10BASE-T/100BASE-TX automatic
switching SIDE)
Connector: Modular Jack (RJ-45)
USB
Interface
Front face: USB 1.1 (Low/ Full Speed 12 Mbps) × 1 port
Side face: USB 2.0 (High Speed 480 Mbps) × 4 ports
Connector: USB TYPE-A
Power supply voltage: 5V DC ±5%
Output current : Each port: 500mA (max.), Total 5 ports (Front and
Left): 500mA (max.)
The maximum communication distance: 5m
RAS
Interface
General Input 2ch (DIN1 can be used as Reset Input),
General Output 2ch
Connector: D-SUB 9 pin (socket)
Speaker
Output
Interface
Stereo Speaker output
Connector: Mini Pin Jack
IDE
Ultra ATA100
Primary Master: 2.5 inch HD slot
Primary Slave: CF card slot (Type II)
PCMCIA
Corresponding to CARD BUS
(Excluding ZOOM VIDEO, SOUND functions)
PCI PCI Rev. 2.2 (33MHz) None
Clock Accuracy
*1
*1 The RTC clock built in the PS-A has a timing error. The range of the error will be between
+300 ~ -300 sec. / month, depending on the PS-A’s conditions such as lifetime usage or
temperature difference. If you use the PS-A in a system that is very dependent on timing,
adjust the clock in regular intervals.
± 180 sec. / month (timing error depending on the situation at normal
temperature and power-off)