Proface APL3000B - Node Box PC User Manual

Page 143

PS-3650A / PS-3651A User Manual

7-4

(4)

Remove dust on the filter using a cleaner etc. If stubborn dirt or stains are present, wash the filter with a

neutral detergent.

(5)

Install the filter and tighten the screws of the fan cover.

(6)

Install the fan unit in the PS-A unit.

• Do not wring the filter to dry it.

• When drying the filter, dry it without exposing it to direct sunlight.

• Dry the filter completely before reattaching it.

• Be sure the fan cover is securely attached to the PS-A unit. This is to ensure the

fan cover does not fall while the PS-A unit is operating.

• When installing the fan unit in the PS-A unit, keep the cable as left as possible seen

from the back surface of the PS-A unit, so that the fan cannot contact with it.

Filter