2 smart, 2 smart -34 – Proface APL3000B - Node Box PC User Manual
Page 135
PS-3650A / PS-3651A User Manual
6-34
6.9.2
SMART
Item
Operation
Device No.
Displays the number assigned to the hard disk to be monitored.
Model
Displays the model of the hard disk.
Status
Specifies the item to be monitored. The status of each monitoring item is
displayed.
[Pass]: Normal
[Error]: Abnormal
[Disable]: Not monitored
[Not Support]: Not supported
•
[Not Support] is displayed when a device like a CF card, which does not support
SMART, is detected.
Buzzer Off
When [Buzzer] is selected for the error notification method, you can stop the
buzzer by clicking [Buzzer Off].
Reset
When an error is detected, clicking [Reset] recovers the System Monitor
from the “error” status.
•
After an error is resolved, make sure to reset. If reset is not performed, the error
history remains, which causes the error to be detected again even if it was resolved.
For the procedure to recover from an error status, refer to the following section.
Minimize
Stores the System Monitor screen in the task tray.
SEE