Proface APL3000B - Node Box PC - Manual (Page 72)

Chapter 4 System Setup
4-13
„ Cache Memory
Point the cursor to the [Cache Memory] on the [Advanced] screen and press the [Enter] Key, so that the
following screen will be displayed.
Memory Cache
Specifies an enabled/disabled state for the Memory Cache. The choice is [Enabled] or [Disabled]. The factory
default setting is [Enabled].
Cache System BIOS area
Specifies the cache set-up for the System BIOS area. The choice is [uncached] or [Write Protect]. The factory
default setting is [Write Protect].
Cache Video BIOS area
Specifies the cache set-up for the VIDEO BIOS area. The choice is [uncached] or [Write Protect]. The factory
default setting is [Write Protect].
Cache Base 0-512k
Specifies the cache set-up for the Base Memory, 0 ~ 512k. Select from [uncached], [Write Through], [Write
Protect], or [Write Back]. The factory default setting is [Write Back].
Cache Base 512-640k
Specifies the cache set-up for the Base Memory, 512 ~ 620k. Select from [uncached], [Write Through], [Write
Protect], or [Write Back]. The factory default setting is [Write Back].
Cache Extended Memory Area
Specifies the cache set-up for the Extended Memory area. Select from [uncached], [Write Through], [Write
Protect], or [Write Back]. The factory default setting is [Write Back].