Proface APL3000B - Node Box PC - Manual (Page 42)

Chapter 3 Hardware Installation
3-5
„ Installing the PS-A
(1) Insert the PS-A into the panel cut, as shown.
(2) Insert the installation fasteners into the PS-A
insertion slots, at the top and bottom of the
unit. (total: 4 slots)
(3) Insert each of the fasteners shown below.
Be sure to pull the fastener back until it is
flush with the rear of the attachment hole.
• Insert each installation
fastener securely into the
slot’s recess (shaded area).
•
Slots
Installation Panel
Hook