Proface APL3000B - Node Box PC User Manual
Page 66
Chapter 4 System Setup
4-7
Advanced Chipset Control
Point the cursor to the [Advanced Chipset Control] and press the [Enter] Key, so that you can set up details.
I/O Device Configuration
Point the cursor to the [I/O Device Configuration] and press the [Enter] Key, so that you can go to the Serial
Port Setting screen
Keyboard Features
Point the cursor to the [Keyboard Features] and press the [Enter] Key, so that you can go to the keyboard set-
up screen.
Cache Memory
Point the cursor to the [Cache Memory] and press the [Enter] Key, so that you can go to the set-up screen for
Cache Memory.
PCI Configuration
Point the cursor to the [PCI Configuration] and press the [Enter] Key, so that you can go to the set-up screen
for PCI IRQ.
DMI Event Logging
Point the cursor to [DMI Event Logging] and press the [Enter] Key to go to the set-up screen for DMI event
logging.
Disable ACPI_Sx
Specifies the API’s state. Select from [None] or [S1]. With this action, the selecting state will be enabled. The
factory default setting is [None].
Legacy USB Support
When the USB keyboard is used under DOS, specifies an enabled/disabled state for the USB. The choice is
[Enabled] or [Disabled]. The factory default setting is [Enabled].
Enable Memory gap
Specifies an enabled/disabled state for the Memory gap. The choice is [Enabled] or [Disabled]. The factory
default setting is [Disabled].
Summary screen
Specifies whether you need to display the Summary screen in running the daisy-chained devices. The choice
is [Enabled] or [Disabled]. The factory default setting is [Disable].
SEE
Advanced Chipset Control (page4-9)
SEE
I/O Device Configuration (page4-11)
SEE
SEE
SEE
SEE