Input circuit drawings internal circuit wiring – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 19
19
Input Circuit Drawings
Internal Circuit
Wiring
indicates a fuse.
indicates load.
• The relay specifications can change the COM power supply.
• Since the output terminals are not electrically protected, an output line might be shortcir-
cuited or a connection fault might damage this product. Please install an applicable fuse to
prevent an overload in the circuit, if necessary.
• The COM0 and COM1 terminals are not connected together internally.
• Please be sure to refer 1.Essential Safety Precautions“About the Relay Output Inductive
Load”, page 3
Internal Circuit
N.O
COM
Terminal Block
Qx (Load)
L
Q0 0
Q1 1
Q2 2
Q3 3
COM0
NC
Q4 4
Q5 5
Q6 6
Q7 7
COM1
Q0 0
Q1 1
Q2 2
Q3 3
Q4 4
Q5 5
Q6 6
Q7 7
COM0
COM0
Q8 8
Q9 9
Q10 10
Q11 11
Q12 12
Q13 13
Q14 14
Q15 15
COM1
COM1
/
U
*1
*1
1
1
*1 Protection for inductive load
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" LT3200 - 3.8 All-in-One HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"