Maple Systems OIT Family (ASCII) User Manual
Page 36
Long: This format is used to represent a 32-bit register or two consecutive 16-bit registers in
the OIT as a signed long integer value with a range of -2,147,483,648 to +2,147,483,647.
4-Digit BCD: This format is used to represent a 16-bit register in the OIT as a BCD value
with a range of 0 to 9,999. If the value in the OIT register is not in BCD format, then the OIT
will display the value as hexadecimal.
8-Digit BCD: This format is used to represent a 32-bit register or two consecutive 16-bit reg-
isters in the OIT as a BCD value with a range of 0 to 99,999,999. If the value in the OIT regis-
ter is not in BCD format, then the OIT will display the value as hexadecimal.
1/0 Coil: This format is used to represent a single coil in the OIT as a binary value with 0 indi-
cating the coil is off and 1 indicating that the coil is on.
FEATURES
35
1010-0088, REV02
2
3
4
6
5
7
8
MESSAGE ALARM
RUN
1
Reg 4 (Dec): 58874 Reg 5 (Dec): 5896
Register 4 (Long): 386459130
2
3
4
6
5
7
8
MESSAGE ALARM
RUN
1
Output Status (4-Digit BCD): 4356
2
3
4
6
5
7
8
MESSAGE ALARM
RUN
1
Reg 2 (BCD): 5423 Reg 3 (BCD): 5542
Reg 2 (8-Digit BCD): 55425423
2
3
4
6
5
7
8
MESSAGE ALARM
RUN
1
Use switch #1 to change status of coil
Motor: On
Motor: 1