Local setup mode – Maple Systems OIT Family (ASCII) User Manual
Page 21

Local Setup Mode
The OIT has a local setup mode which can be accessed by pressing the Setup key on the nu-
meric keypad. On the OIT3160 and OIT4160 models, local setup mode is entered either by
pressing the Enter key three times consecutively when the OIT is communicating to an
ASCII host or by holding the Clear key down when the OIT is initializing.
The local setup can be used by the OIT programmer for the following:
•
configuration of the OIT using the OITware 200 configuration software
•
entering bypass mode
•
changing the display level
•
changing the OIT clock time and date
•
setting security passwords
•
enabling the screen saver.
Once in the setup mode, the OIT will prompt the operator for the setup password. Once the
five-digit numeric password has been entered, the following text is displayed:
Note: Some of the menu selections are not available, depending upon the model of OIT.
When in local setup mode, all of the keys on the OIT are disabled except for the following:
•
Clear key–Used to clear an entry or reset the value back to the original setting. This key
can also be used to back out of the menus and eventually exit the local setup mode without
saving any of the changes.
•
Toggle key–Used to toggle through the various selections that are available for a menu.
•
Enter key–Used to accept the current data entry for a menu and advance to the next menu.
•
0-9 keys–Used to enter numerical data.
20
OIT Family Operation Manual (ASCII)
1010-0088, REV02
Level 1 Menus
Option
Level 2 Menus
DOWNLOAD/UPLOAD OIT
PROJECT?
YES
NO
COMMUNICATING TO COMPUTER
Go to next Level 1 Menu
ENTER OIT BYPASS MODE?
YES
NO
BYPASS MODE ACTIVE
Go to next Level 1 Menu
VIEWING DISPLAY LEVEL?
90d, 75d or
100%, 75%, 50%,
30%
CHANGE TIME/DATE
SETTINGS?
YES
NO
Enter date setting (MM.DD.YY)
Enter day of week setting:
MONDAY
Enter 24hr time setting (HH.MM)
Go to next Level 1 Menu
MODIFY OIT PASSWORDS?
YES
NO
ENTER SETUP PASSWORD: XXXXX
ENTER LEVEL 1 PASSWORD: XXXX
ENTER LEVEL 2 PASSWORD: XXXX
ENTER LEVEL 3 PASSWORD: XXXX
ENTER LEVEL 4 PASSWORD: XXXX
Go to next Level 1 Menu
ENABLE SCREEN SAVER?
0-60 minutes
5 min. intervals