IEI Integration NANO-945GSE v2.00 - Manual (Page 120)

NANO-945GSE EPIC Motherboard
Page 120
 278 Parallel Port I/O port address is 278
 3BC Parallel Port I/O port address is 3BC
 Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
 Normal D
EFAULT The normal parallel port mode is the standard mode
for parallel port operation.
 EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
 ECP+EPP The parallel port operates in the extended
capabilities port (ECP) mode. The ECP mode
supports bi-directional communication between the
system and the parallel port device and the
transmission rates between the two are much faster
than the Normal mode
The parallel port is also be compatible with EPP
devices described above
 Parallel Port IRQ [IRQ7]
Use the Parallel Port IRQ selection to set the parallel port interrupt address.
 IRQ5 IRQ5 is assigned as the parallel port interrupt address
 IRQ7 D
EFAULT IRQ7 is assigned as the parallel port interrupt address