4 serial device connection, Figure 4-10: lan connection – IEI Integration KINO-DH810 User Manual

Page 69

KINO-DH810

P a g e 57

Figure 4-10: LAN Connection

S te p 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

4.5.4 S e ria l De vic e Co n n e c tio n

The KINO-DH810 has two single female DB-9 connectors on the external peripheral

interface panel for a serial device. Follow the steps below to connect a serial device to the

KINO-DH810.

S te p 1:

Locate the DB-9 connector. The locations of the DB-9 connectors are shown

in Chapter 3.

S te p 2:

Insert the serial connector.

Insert the DB-9 connector of a serial device into

the DB-9 connector on the external peripheral interface. See Figure 4-11.