IAI America IF - Manual (Page 73)

8. W
arranty
67
8.4 Limit in Responsibility
(1) We shall assume no liability for any special damage, consequential loss or passive loss such
as a loss of expected profit arising from or in connection with our product.
(2) We shall not be liable for any program or control method created by the customer to operate
our product or for the result of such program or control method.
8.5 Conditions of Conformance with Applicable Standards/Regulations, Etc.,
and Applications
(1) If our product is combined with another product or any system, device, etc., used by the
customer, the customer must first check the applicable standards, regulations and/or rules.
The customer is also responsible for confirming that such combination with our product
conforms to the applicable standards, etc. In such a case we will not be liable for the
conformance of our product with the applicable standards, etc.
(2) Our product is for general industrial use. It is not intended or designed for the applications
specified below, which require a high level of safety. Accordingly, as a rule our product cannot
be used in these applications. Contact us if you must use our product for any of these
applications:
1) Medical equipment used to maintain, control or otherwise affect human life or physical
health
2) Mechanisms and machinery designed for the purpose of moving or transporting people
(For vehicle, railway facility or air navigation facility)
3) Important safety parts of machinery (Safety device, etc.)
4) Equipment used to handle cultural assets, art or other irreplaceable items
(3) Contact us at the earliest opportunity if our product is to be used in any condition or
environment that differs from what is specified in the catalog or instruction manual.
8.6 Other Items Excluded from Warranty
The price of the product does not include the cost to create programs or sending an engineer.
Accordingly, a separate fee will be charged in the following cases even during the warranty period:
1) Instruction for adjustment in installation or joining to the test run of product operation.
2) Maintenance inspection
3) Technical instruction or education for operation or cable layout
4) Technical instruction or education related to programing such as creating a program