IAI America IF - Manual (Page 41)

3. Connection to the controller
35
3. Connection to the controller
For the controller, only the dedicated controller manufactured by our company can be used.
Use the dedicated cable enclosed in the package when connecting the actuator and the controller.
[1] Standard cable
[Connection to the XSEL-J/K controller]
Actuator
Dedicated Controller
XSEL-J/K
Dedicated Cable
(Connect actuator with
the dedicated controller)
r=51mm or more (Movable Use)
r=34mm or more (Fixed Use)
r
r
x
Motor Cable CB-X-MAƑƑƑ
x
Encoder Cable CB-X-PAƑƑƑ
x
Limit Switch Cable CB-X-LCƑƑƑ
ƑƑƑ
shows the cable length.
The max. length should be 30m.
Example) 080=8m
[Connection to the XSEL-P/Q, SSEL and SCON controller]
Actuator
Dedicated Controller
XSEL-P/Q, SSEL, SCON
r=58mm or more (Movable Use)
r=38mm or more (Fixed Use)
r
r
Dedicated Cable
(Connect actuator with
the dedicated controller)
x
Motor Cable CB-X-MAƑƑƑ
x
Encoder Cable CB-X1-PAƑƑƑ
x
Encoder Cable with LS CB-X1-PLAƑƑƑ
ƑƑƑ
shows the cable length.
The max. length should be 30m.
Example) 080=8m