IAI America IF - Manual (Page 39)

2. Installation
33
x
There are tapped holes in the slider where you can affix the payload.
The way to affix follows the installation of the main unit.
x
If you are anchoring the slider and moving the main body, attach the slider using the
tapped holes.
x
The slider has two reamed holes which are used to reproduce the correct positioning
when dismounting and reattaching the slider. Also, if you require precision in your
attachment, such as a right angle, use the reamed hole to make fine adjustments.
Slider Tap Hole Diameter and Reamer Diameter
Model
Tapped
Holes
Tap depth A B C
Reamed
Hole
Reamed
Depth
S Type M6 20mm 70mm - 90mm
I 6H10 10mm
M6 20mm - 70mm
M Type
M8 20mm 90mm -
120mm
I
8H10 10mm