Fairbanks FB2255 Series Instrument PC2255 PC Software Utility Program - Manual (Page 26)

Section 4: Input / Output
01/13 26 51297 Rev. 1
4.2. Okidata 186 T Form Printer, Continued
Follow these steps to change Menu Settings.
1. To enter MENU MODE, press and hold SELECT while turning on the printer.
– The “12” and “UTILITY” LEDs will blink.
2. With the printer in the Menu Mode, press SELECT to print the complete menu.
– The current default settings print out.
– It is recommended to use tractor fed paper.
NOTE: The Printed Menu selections are different for each Emulation Mode.
3. Press LINE FEED to select the relevant group to be changed.
– The group is the left-hand column on the Menu Printout.
4. Press FORM FEED to select the relevant item within the selected group.
– The Item is the center column on the Menu Printout.
5. Press TOF SET to cycle through the settings available for the item to change.
– The settings are the right-hand column on the Menu Printout.
6. To continue making changes: press LINE FEED for the next group or press
FORM FEED for the next item.
– Repeat as needed until finished changing settings.
7. Press PITCH and MODE together to save the changes and exit the Menu
Mode.
NOTES: Exiting the Menu Mode by turning off the printer will cancel any
changed settings.