Fairbanks FB2255 Series Instrument PC2255 PC Software Utility Program - Manual (Page 17)

Section 3: Serial Communication Wiring
01/13 17 51297 Rev. 1
2.6. Gross Weighing
Follow these steps for Gross Weighing.
1. Press the GROSS/NET key, if required, to set display to GR (gross).
2. Press the ZERO key, if required, to set scale to “0”.
3. Place container/object on scale (Tare weight).
4. Read the Gross Weight on the display.
2.7. Net Weighing
Follow these steps for Net Weighing.
1. Press the GROSS/NET key, if required, to set display to GR (gross).
2. Press the ZERO key, if required, to set scale to “0”.
3. Place container/object on scale (Tare weight).
4. Press the TARE key.
5. Place material in container or add objects (Net weight).
6. Read the Net Weight on the display.
2.8. Gross/Tare/Net Weighing
1. Press the GROSS/NET key to display GR (Gross).
2. Press the ZERO key, if required, to set scale to “0”.
3. Place container/object on scale, noting the weight.
4. Press TARE .
5. Place material in container or add objects.
6. Note the Net Weight on the display.
7. Press the GROSS/NET key to switch to Gross .
8. Read the Gross Weight on the display.