Fairbanks FB2255 Series Instrument PC2255 PC Software Utility Program - Manual (Page 14)

Section 3: Serial Communication Wiring
01/13 14 51297 Rev. 1
Press, hold
PRINT for
3 seconds
Press MENU
Press ENTER
Enter AM, PM,
Mil. Time with
ARROW Keys
Press
ENTER
Press RIGHT
ARROW
Enter Time
with
0-9 Keys
Press MENU
Press MENU
Press
ENTER
Enter Date with
0-9 Keys
2.2. Front Panel Programming Parameters
Follow these steps to program the Instrument.
2.2.1. SETTING THE TIME
1. Press and hold the PRINT key for three (3) seconds.
– The display momentarily displays Set-ti , then shows the current
time in HHMMSS .
2. Press the RIGHT ARROW key will scroll to “12hr A”, “Set-
dA”, and then back to Weigh Menu.
3. When the current time setting is displayed, press the MENU key.
– The most significant digit will erase.
4. Key the new time setting with the 0-9 keys.
5. Press ENTER .
6. At the “12hr A” prompt, press the MENU key.
7. Use the ARROW KEYS to toggle through the option noted below.
• 12hr A – 12 hour clock, currently AM.
• 12hr P – 12 hour clock, currently PM.
• 24 hour – Military time (1:00 PM = 1300 hours).
8. Press ENTER to save the setting.
2.2.2. SETTING THE DATE
•
Set-dA displays , followed by the current date setting.
•
Date is entered in the MM-DD-YY format.
1. Press Menu .
– The first two digits will blink.
– The most significant digit will erase.
2. Key the new time setting with the 0-9 keys.
3. Press ENTER .