Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 48)

Section 5: Programming Configuration
04/13 48 51278 Rev. 2
B. Zero tracking
Sets the zero tracking by number of divisions.
Display Descriptions
trAcE no Zero tracking disabled.
trAcE 0.5d Zero tracking enabled, tracking set to 0.5d
trAcE 1d Zero tracking enabled, tracking set to 1d. (Default)
trAcE 2d Zero tracking enabled, tracking set to 2d
trAcE 3d Zero tracking enabled, tracking set to 3d
C. Display Tolerance
Sets the display tolerance or motion detection value.
Display Descriptions
no.dEt no Display tolerance is disabled.
no.dEt 0.5d
Display tolerance is 0.5d. If the weight changes are under
0.5d, the display will not update and motion is not indicated.
no.dEt 1d
Display tolerance is 1d. If the weight changes are under 1d,
the display will not update and motion is not indicated.
no.dEt 2d
Display tolerance is 2d. If the weight changes are under 2d,
the display will not update and motion is not indicated.
no.dEt 3d
Display tolerance is 3d. If the weight changes are under 3d,
the display will not update and motion is not indicated.