Fairbanks OMEGA SERIES COUNTING SCALE User Manual

Page 44

Section 5: Programming Configuration

04/13

51278 Rev. 2

Example 2:

1. Open a hyper terminal session and connect at 9600 8-n-1.

2. Set Serial 1 to PrESS, weight output using print net. Set the baud rate to

9600, 8 characters, No parity, and 1 stop bit.

3. Set PLU = no, Time and date = YES, Piece information = no, Piece Weight

= YES, Accumulation information = YES, and Accumulation Weight =

YES.

4. Press

to set Piece Weight as 0.001 lb.

5. Press

to store the current data in PLU 1.

6. Place a 1 pound item on scale weighing pan.

7. Press

to record 1 Accumulation data.

8. Press the

key. The data output is shown below:

1.0000 lb NT

0.001 lb PW

1.0000 lb NT ACC

05:40 PM

01/01/2010

Example 3:

1. Open a hyper terminal session and connect at 9600 8-n-1.

2. Set Serial 1 to PrESS, weight output using print net. Set the baud rate to

9600, 8 characters, No parity, and 1 stop bit.

3. Set PLU = Yes, Time and date = YES, Piece information = no, Piece

Weight = YES, Accumulation information = no, and Accumulation Weight

= no.