Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 24)

Section 4: User Operations
04/13 24 51278 Rev. 2
4.6.3. MODIFY PLU, continued
5. rEPLAC is displayed on the Piece Weight line making sure you want to overwrite
the previously stored value. Press key to change from Yes to No. Press the
key to overwrite.
Example:
1. Press key to access the third PLU.
2. Press key to access the PLU modify mode. Piece Weight is flashing
now.
3. Press key. The Piece Weight 0.5.
4. Press key..
5. Tare weight will blink.
6. Press .01234 keys.
7. Press key.
8. rEPLAC is displayed on the Piece Weight line and YES is displayed on the
Pieces line. Press the key to change from YES to no. YES saves the
changes into memory and no will not save the changes and will revert back to
previously store settings. Press the key to accept setting.
4.7. MORE OPERATIONS
4.7.1. ACCUMULATION
1. When there is a load on the scale weighing pan and piece weight has been
input.
2. Press key. When you hear a beep, lights up on the LCD,
indicating a data has been recorded.
3. Clear the load and put another load on the scale pan. Set up the piece
weight again.
4. Press key. After a beep sound, lights up, indicating second data
has been recorded.