Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 47)

Section 5: Programming Configuration
04/13 47 51278 Rev. 2
15. Serial 2 – Parity, continued
Example:
1. Connect to barcode reader.
2. Scan barcode below:
3. The unit will be set as lb, and Piece Weight will be set as 0.000271.
**This completes the Print Settings (Prt). SAvE is displayed briefly before the scale
cycles power and returns to the weigh mode.**
5.6. CONFIGURATION (CON-F)
Press to browse the menu options. Use the numeric keys to input data and
press to save your settings.
A. Basic Unit
Set the basic unit of scale. User can change the output unit by key, but
scale will be calibrated by basic unit.
Display Descriptions
P.Unit
Set basic unit to lb. (Default)
Annunciators on the right side of the display indicate the
current setting.
P.Unit
Set basic unit to kg.
Annunciators on the right side of the display indicate the
current setting.
Note:
If this setting is changed, the scale will advance to the calibration procedure.