beautypg.com

B scale selection – Fairbanks OMEGA SERIES COUNTING SCALE User Manual

Page 30

background image

Section 4: User Operations

04/13

30

51278 Rev. 2

4.8. B SCALE SELECTION

1. Press

to switch between main scale and the external scale.

2. The initial zero is the zero setup configured in the calibration procedure. It

means any loads on the weighing pan will exactly display after the scale

start.

Note:

If the Omega Counting Scale is connected to any new external scale, calibration
must be performed. This procedure is located in the Remote Scale Settings.