Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 22)

Section 4: User Operations
04/13 22 51278 Rev. 2
7.6.1. SETTING PLU, CONTINUED
B. Steps in setting PLU no.0~999
1. Set up the piece weight as in Sampling Operation section 4.5.
2. Press and will begin flashing on the display.
3. Press the numeric keys to select PLU number.
4. Press to save your setting, will stop flashing on the display.
5. rEPLAC and YES is displayed. Press the key to accept the change
or press key to display rEPLAC and No. Press the key to disregard
the changes.
Example： ： ： ：
1. Press to enter piece weight as 0.5 gram.
2. Press key, now is flashing on the display.
3. Press key. PLU indicator shows 555, and is flashing.
4. Press key, after the beep, the piece weight for PLU 555 is stored as 0.5
gram.
5. rEPLAC and YES is displayed. Press the key to accept the change or
press key to display rEPLAC and No. Press the key to disregard the
changes.
Note:
If there is no data input in 30 seconds, the scale exits the PLU setting mode and
returns to normal weighing mode.