Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 38)

Section 5: Programming Configuration
04/13 38 51278 Rev. 2
5.5. PRINT SETTINGS (PRT)
Press to toggle among the options, and press to confirm.
1. Serial 1 - Output Method Changes the method to initiate data information
output.
Display Descriptions
SEr.1
PrESS
Initiates data transmission when the PRINT key is pressed .
(Default)
SEr.1
Auto Initiates data transmission when scale weight is stable.
Scale weight must return to zero before the next print will
occur.
SEr.1
rEn.dS
Remote display Output. This programs the serial 1 output
as fixed remote display output which is configured using
19200 as baud rate, 8 characters, No parity, and 1 stop bit.
These settings cannot be changed.
SEr.1
Poll
Initiates data transmission when a is received
2. Serial 1 - Weight Output Change the weight output data of serial 1. Print
net only or print Gross, Tare, and Net.
Display Descriptions
SEr.1
Pr.nEt
nEt
Outputs only the Net weight.
SEr.1
Pr.nEt
G.t.nEt
Outputs Gross, Tare, and Net weights. (Default)