Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 21)

Section 4: User Operations
04/13 21 51278 Rev. 2
Note:
Auto Re-sample function can be disabled in Setup settings menu.
4.6. PLU (PART LOOK UP) OPERATION
PLU is a preset Piece Weight and Tare value. The scale can save up to 999
PLU items.
4.6.1. SETTING PLU
A. Steps in setting PLU keys 1~9
1.Set up piece weight as in Sampling Operation section 4.5.
2.Press , and will begin flashing.
3.Select your desired PLU number from the direct PLU keys.
4.Press to save your setting. will stop flashing.
5.rEPLAC and YES is displayed. Press the key to accept the change
or press key to display rEPLAC and No. Press the key to
disregard the changes.
Example： ： ： ：
1. Press to enter piece weight as 0.5 gram.
2. Press key, now is flashing on the display.
3. Press key, PLU indicator shows 3, and now flashing.
4. Press key, after the beep, the piece weight for PLU 3 is now set as 0.5
gram.
5. rEPLAC and YES is displayed. Press the key to accept the change or
press key to display rEPLAC and No. Press the key to disregard the
changes.
Note:
If there is no data input in 30 seconds, the scale will exit the PLU setting mode and
returns to the normal weighing mode.