Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 14)

Section 4: User Operations
04/13 14 51278 Rev. 2
4.2.2. KEYPAD, continued
A. KEYPAD FUNCTIONS
Key Function
Press to switch the scale OFF.
Press to turn the scale ON.
Initiates a print cycle. Note: Internal Programming must be
activated.
Press to confirm entry or selection.
~
Press the numeric and decimal keys to input data such as
piece weight, PLU no., etc.
Press to change unit of measure. There are two units
selections available. Pound (lb) or Kilogram (kg). The current
unit selected is displayed on the right hand side of the actual
weight display.
Press to set the scale to zero.
Press to display select Gross Weight, Net Weight, or Tare
Weight.
Press to enter the actual weight as the tare.
Press to set the alarm for high and low limits for piece counts
and piece weights.
Press to add piece count and weight.
Press to switch operation between scale A (main scale) and
scale B (remote scale).
Press to store, load, or modify a preset piece weight.
PLU (Part Look Up) keys. Press to load preset piece weight
data from the nine (9) PLU keys.