Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 10)

Section 2: Company Service Information
04/13 10 51278 Rev. 2
IMPORTANT NOTICE
• All load cells, load cell cables and interconnecting cables used to connect all
scale components shall be located a minimum of thirty-six (36”) inches
distance away from all single and multiple phase high energy circuits and
electric current carrying conductors.
• This includes digital weight indicators, junction boxes, and
power supplies.
• This includes any peripheral devices, such as printers, remote
displays, and auxiliary data entry devices.
• Also included is 120 volt AC, 240 volt AC, 480 volt AC and
electric supply of higher voltage wiring runs and stations, AC
power transformers, overhead or buried cables, electric
distribution panels, electric motors, florescent and high intensity
lighting which utilize ballast assemblies, electric heating
equipment, traffic light wiring and power, and relay boxes.
• All scale components, including digital weight indicators and
peripheral devices are not designed to operate on internal
combustion engine driven electric generators and other similar equipment.
• Electric arc welding can severely damage scale components such as digital
weight indicators, junction boxes, power supplies, and load cells.
NOTE: For additional information, please contact a Fairbanks Scales Service
Representative.