Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 19)

Section 4: User Operations
04/13 19 51278 Rev. 2
5. The piece weight may be cleared by pressing the key.
Example： ： ： ：
1. Press to enter the sample mode.
2. Press to set the manual entered piece count number as 5. It is displayed
on the third line.
3. Place 1 lb on the scale weighing pan.
4. Wait 5 seconds after the weight is stable and the piece weight is displayed as
0.2 and the piece count is displayed as 5.
Note:
If weighing is performed on external scale, after the is pressed, the sampling job
will be continued on main scale automatically when auto switch is configured in the
scale counting parameter setting.
4.5.4. SETUP PIECE WEIGHT BY SAMPLING (REMOVE ITEM)
1. Make sure the piece weight on the display is zero.
2. Place a item on the weighing pan. The Omega Counting Scale will calculate the
piece weight based upon the change in weight..
3. Press , the second row of LCD displays and the third row of LCD
displays the default value as 100.
4. Press the numeric keys to enter the new sampling quantity.
5. Remove the items to obtain the desired piece counts value from the weighing
pan. The piece weight will be calculated automatically.
6. The piece weight may be cleared by pressing the key.
Example： ： ： ：
1. Place 5 lbs on the scale weighing pan.
2. Press to into sample mode.
3. Press to set item number as 5. It is displayed on the third line.
4. Remove the 1 lb item on scale weighing pan.
5. Wait for 5 seconds after the weight is stable. The piece weight displays 0.2
and piece count displays 5 .