Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 33)

Section 5: Programming Configuration
04/13 33 51278 Rev. 2
2. b. L - Backlight Setting
Display Descriptions
b.L no Disable the backlight function.
b.L YES Enable the backlight function.
b.L AUto Automatic backlight when there is load on the weighing pan.
(Default)
Example:
1. Set Backlight as YES.
2. Power up and reset the weight.
3. Backlight is enabled..
3. A.tArE - Tare Setting
Display Descriptions
A.tArE no Disable Tare operation
A.tArE YES Enable Tare operation. (Default)
Example:
1. Set A.tArE = YES.
2. Power up and place a 0.1 pound item on scale weighing pan.
3. Press key to perform a Tare Operation. The weight will change to zero,
and is displayed.
4. Cycle power to the scale and enter the setting again. Set A.tArE = no.
5. Press key to perform a Tare Operation. The scale will make a long beep
and no tare will be performed.