FEC AFC1200 - Manual (Page 91)

)(& ,QF
3-5 Directory creation [COPY]
3-5a A destination directory will be created as a result of performing the copy
function to a non existent [DESTINATION DIRECTORY]. No file need be specified
when the copy function is performed.
3-5b MOVE the cursor on the menu bar to [COPY] using the
[←] [→]
keys and
press the
[↵]
key. the "COPY" pulldown menu will appear. SELect the desired
[DESTINATION DRIVE] using the
[←] [→]
keys and the press the
[↵]
key.
3-5c. TO input the DESTINATION DIRECTORY, move the highlighted cursor to the
[DESTINATION DIRECTORY] position and depress the
[↵]
key. THe alphanumeric
pulldown menu will appear with a small field and a black flashing cursor. THE alpha-
numeric menu will show a blue highlighted character. TO input a character into the
field, use the
[←] [→]
key to move to the desired character. The character to be
selected will appear blue highlighted. DEpress the
[↵]
key and the blue highlighted
character will appear in the small field at the top of the menu. UPOn completion of
entering the desired destination directory, move the blue cursor to [INPUT END] and
depress the
[↵]
key. THe pulldown menu will disappear and the selected destination
directory will appear.
3-5d move the cursor in the copy pulldown window to either [COPY] or [CANCEL]
as desired and depress the
[↵]
key.
FIG. 7-15-3-5 FILE UTILITY directory creation [DESTINATION DIRECTORY]
Chapter 7: System Operation
Page 7-91