FEC AFC1200 - Manual (Page 48)

)(& ,QF
7-2. DEPRess the
[↵]
key and the copy pulldown menu will appear with the cursor
flashing at the "COPY FROM SPINDLE NO." position.
7-3. USing the numerical keys insert the SPINDLE NO. to be copied.
7-4. USing the
[↑] [↓]
keys move the cursor to "COPY TO SPINDLE NO." THe cursor
will be flashing at the "COPY TO SPINDLE NO." position.
7-5. USINg the numerical keys insert the SPINDLE NO. to be copied to or select the "ALL
SPINDLES" option and depress the
[↵]
key. THe question "DATA CHANGE OK?"
will appear.
7-6. USINg the
[←] [→]
keys move the cursor to YES or NO and depress the
[↵]
key.
THE sequence will be copied and the screen will change to display the copied
sequence.
NOTE: THE target (COPY TO) SPINDLE No. must be entered on the set sequence screen in order
to enter a new or copied sequence.
FIG. 7-5-7 set sequence, copy function
7.5.8 sequence COPY FUNCTION
8-1. PLACe the RUN/PROGRAM key to the PROGRAM position and move the cursor on
the menu bar to [SEQ COPY] using the
[←] [→]
keys.
8-2. DEPRess the
[↵]
key and the copy pulldown menu will appear with the cursor
flashing at the "COPY FROM SEQUENCE NO." position.
8-3. USing the numerical keys insert the SEQUENCE NO. to be copied.
8-4. USing the
[↑] [↓]
keys move the cursor to "COPY TO SEQUENCE NO." THe cursor
will be flashing at the "COPY TO SEQUENCE NO." position.
8-5. USINg the numerical keys insert the SEQUENCE NO. to be copied to and depress
the
[↵]
key. THe question "DATA CHANGE OK?" will appear.
8-6. USINg the
[←] [→]
keys move the cursor to YES or NO and depress the
[↵]
key.
THE sequence will be copied and the screen will change to display the copied
sequence.
Chapter 7: System Operation
Page 7-48