FEC AFC1200 User Manual

Page 72

Text mode
Original mode

)(& ,QF

7-4.

SElect the desired character/data from the displayed table by using the

[↑]

[

↓

]

and

[←]

[→]

keys. depress the

[↵]

key to paste the selected item into the selected

position on the HEADER FORMAT. Repeat this operation until the header is
formatted as desired. the last item to appear on each line must be the "END OF
PRINT" character, represented on the format line as a ";" bordered in red.

7-5.

After configuring the header perform the same operations for the line format portion
of the screen. Ensure that any columns configured in the header correspond to the
configuration of the line format.

7-6.

After configuring the header and line format, depress the [SEL] key and the question

"DATA CHANGE OK?" will appear. Select YES or NO and depress the

[↵]

key.

Chapter 7: System Operation

Page 7-72