FEC AFC1200 - Manual (Page 87)

)(& ,QF
7.15 FILE UTILITY
THE function of this screen is to perform file maintenance on the System's hard disk drive C:
(HDD) and floppy disk drive B: (FDD).
7.15.1 TABLE of CONTENTS
7.15.1. TABLe for Contents for FILE UTILITY screens
7.15.2. SCREEN EXPLANATION
7.15.3. SCREEN OPERATION/PRINT FUNCTIOn
7.15.2 SCREEN EXPLANATION
2-1. THE file utility screen displays file information for the hard disk drive C: (HDD) or the
floppy disk drive B: (FDD) in the upper window of the display screen. THE bottom
window of the screen displays the files which reside in the directory specified by the
combination of "LOG", "FILESPEC" and "PATH".
2-2. THis screen can be used to perform file maintenance on any drive installed in the
System, primarily for copying files from one drive to another and deleting nonessential
files.
2-3.
THe upper window of the display screen displays current drive and file information for
the file path displayed. The information is displayed as follows;
[PATH]: THe files shown in the lower window of the display screen
have been selected from this drive and directory.
[PAGE]: dIsplays the number of screen pages of files available for
display.
[TAGGED FILE]: DISPLAys number of files which have been tagged. FILEs
must be tagged for an operation to be performed on them.
[FILE NAME]: DISplays file name of cursor selected file.
[TOTAL FILES]: DISPLAys size of total disk memory used.
[AVAILABLE SIZE]: DISPlays total disk size remaining.
[TAGGED FILE(S)]: DISPLAYs size of all tagged files.
[CURRENT FILE]: DISPLAys size of cursor selected file.
7.15.3 scREEN OPERATION
3-1. disk drive selection
3-1a UPon entering the file utility screen for the first time after System power-up,
the hard disk is logged automatically (if equipped). THe disk information will be
displayed when the log is complete.
3-1b MOVE the cursor on the menu bar to [LOG] using the
[←] [→]
keys and
press the
[↵]
key. The "LOG" pulldown menu will appear. SELect the desired drive
using the
[←] [→]
keys and the press the
[↵]
key. THE selected disk drive
directory log will be displayed in the lower window of the screen after it is read from
the disk.
Chapter 7: System Operation
Page 7-87