FEC AFC1200 - Manual (Page 35)

)(& ,QF
3RD RATE INC TORQUE
CHange in torque as measured from CROSSOVER RATE2
TORQue/Angle until completion of fastening
3RD RATE INC ANGLE CHange in angle as measured from CROSSOVER RATE 2
Torque/Angle until completion of fastening
1ST STEP TIME
amoUnt of time used to complete the 1st Step of fastening
FINAL STEP TIME
aMount of time used to complete the FINAL Step of fastening
REVERSE PEAK TORQUE
HIGhest torque value measured during reverse operations
DUTY CYCLE RATIO % [(SPINDLE ON TIme) divided by (TOTAL CYCLE TIme)] x
100 =
DUTY CYCLE RATIO %
SPINDLE STATUS
REsult of fastening: ACCEPT = ACC
REJECT = REJ
ABNORMAL = ABN
EM STOP = STOP
RETRY
SPindle status identification for a retry during the fastening
cycle. EXAMple: (R ACC) = REtry with final accept
TIME
THe time the fastening finished
Chapter 7: System Operation
Page 7-35