PASCO ME-9502 Statics System - Manual (Page 7)

®
M o d e l N o . M E - 9 5 0 2 R e c o m m e n d e d E q u i p m e n t *
0 1 2 - 1 2 8 7 6 B 3
ME-9504 Spares Package
ME-9505 Components Package
ME-8979 Mass and Hanger Set
Components from the ME-8979 PASCO Mass and Hanger Set are used
in most of the statics experiments. The set includes four mass hangers,
a storage box, and twenty-seven masses ranging from 0.5 g to 100 g
made from brass, aluminum, or polycarbonate plastic.
Recommended Equipment*
Load Cell and Load Cell Amplifier
A PS-2201 5 N Load Cell can be used to measure force. When it is con-
nected through an amplifier to a PASCO interface or to a PASCO
hand-held data logger, the force data from the Load Cell can be
recorded, displayed, and analyzed.
.
*See the PASCO catalog or Web site at www.pasco.com for information about PASCO load cells, load cell
amplifiers, interfaces, hand-held data loggers, and data acquisition software.
Item Qty Item Qty
String Tie Assembly 3 Thumbscrew 6-32 by 5/8” (for Cord Clip) 2
Torque Indicator Assembly 6 Thumbscrew 4-40 by 1/2” (for balance arm protractor) 2
Nylon Thread, spool 1 Thumbscrew 6-32 by 1/4” (for balance arm pivot) 1
Cord Tensioning Clip 2 Washer 0.285” OD (for balance arm protractor) 2
Angle Indicator Arm 2 Plumb bob, brass (for inclined plane) 1
Item Qty Item Qty
Large Pulley Assembly 1 Utility Mount Assembly 1
Small Pulley Assembly 2 Mass Cart Assembly 1
Mounted Scale Assembly 1 Torque Wheel Assembly 1
Balance Arm Assembly 1 Inclined Plane Assembly 1
Force Wheel Assembly 1 Friction Block Assembly 1
Double Pulley Assembly 1 Asymmetrical Plate 1
ME-8979 Mass and Hanger Set
PS-2201 5 N Load Cell
Amplifier Model
Load Cell Amplifier (PASPORT) PS-2198
Dual Load Cell Amplifier PS-2205
Load Cell Amplifier (ScienceWorkshop) CI-6464