Controlled Products Systems Group 222X383 - Manual (Page 15)

Installation and Maintenance Manual
7
D0119, Rev. F
Required Tools
9. Roto-hammer and bits 10. Level (installation must be level) 11. Two pair wide
Jaw pliers or two
C clamps, 4” cap.
5. Hammer
6. Screwdriver sets,
Straight and Phillips 7. Wrench set, open
end, 1/4" through 1" 8. Electric drill and bits,
1/8" through 3/8"
4. Allen wrench set 3. Concrete anchor
bolts, four 1/2" x 4
"
2. Carpenters
pencil or crayon
1. Chalkline or other
builders string