beautypg.com

CognitiveTPG CRx User Manual

Page 51

background image

47

Chapter 5: USB A Host

5. The printer reads the file in the CognitiveTPG\Firmware folder, and determines if it

contains a firmware upgrade.

6. If a firmware upgrade is needed, the printer reads the contents of the firmware file,

then re-programs the printer flash memory, and finally reboots. At this time, the

new firmware is loaded and executed in the C Series printer.

NOTES: THE PRINTER WILL ONLY READ THE CONTENTS OF THE USB FLASH DRIVE IF IT IS

INSERTED AFTER THE PRINTER IS READY.

DO NOT MODIFY THE FIRMWARE FILE NAME AS DISTRIBUTED BY CognitiveTPG. THE

PRINTER USES THE FILENAME TO KNOW WHETHER THE FIRMWARE IMAGE CONTAINED

IN THE FILE REPRESENTS AN UPGRADE. CHANGING THE FILENAME WILL RESULT IN

UNEXPECTED RESULTS.

TO GET CONSISTENT RESULTS, THERE SHOULD BE ONLY ONE FILE IN THE CognitiveTPG\

FIRMWARE FOLDER.

IF THE FILE WILL NOT LOAD FROM THE USB FLASH DRIVE, IT MAY BE INCOMPATIBLE OR

IT MAY CONTAIN FIRMWARE THAT IS EARLIER THAN WHAT IS CURRENTLY RUNNING.

PLEASE VERIFY THAT THE FIRMWARE FILE CONTAINED IN THE FOLDER IS PROPER FOR

THE PRINTER. IF IT STILL WILL NOT LOAD, USE THE ADMINISTRATOR CONFIGURING TOOL

TO LOAD THE FIRMWARE.

This manual is related to the following products: