CognitiveTPG CRx - Manual (Page 30)

26
Chapter 2: Getting Started
Figure 2-47. Lift the Mechanism
The media should be visible as shown in Figure 2-48.
Figure 2-48. Front View of Media Being Loaded Under Media Guide
Pull the media forward three to four inches from within the mechanism, past the drive
platen, as shown in Figure 2-49. Center the media on the platen before proceeding to
the next step.
Figure 2-49. Pulling the Media Three to Four Inches then Centering on the Platen
Once the media is pulled forward three to four inches, latch the mechanism as shown
in Figure 2-50.