Accessories, Pactware 3.6, Usb interface – Burkert Type 8696 User Manual
Page 51: Download
51
Accessories
16.
ACCESSORIES
Designation
Order no.
USB adapter for connection to a PC in conjunction with an extension cable
227093
Communications software based on FDT/DTM technology
(Information see chapter entitled “16.1. Communications software (PC
SOFTWARE based on FDT/DTM technology):”)
Information at
Connection cable M12 x 1, 8-pole
919061
Assembly tool
647078
Table 25:
Accessories
16.1. Communications software (PC SOFTWARE based
on FDT/DTM technology):
The communications software consists of the Bürkert DTM devices (configuration and parameterization software)
and an associated frame application, e.g. PACTware 3.6.
The DTMs can only run in conjunction with an FDT frame application such as PACTware.
The PC operating program is designed for communication with the devices from the Bürkert positioner family
(basic models without display).
A detailed description and precise schedule of the procedure for the installation and operation of the
software can be found in the associated documentation.
16.1.1. PACTware 3.6
Frame program of the PACTware Consortium e. V. for the recording and operation of FDT 1.2 or FDT 1.2.1 com-
pliant DTMs of any manufacturers.
Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 must be installed.
16.1.2. USB interface
The PC requires an USB interface for communication with the positioners as well as an additional adapter with
interface driver (see “Table 25: Accessories”).
The data transfer must be according to HART specification; the HART communications DTM, also installed during
the installation of PACTware, can be used for this.
16.1.3. Download
Download the software (DTM and PACTware) at:
The latest version of the communications software is always available by means of the download function.
english
Type 8696