Burkert Type 8696 - Manual (Page 18)

18
Systemdescription
5.6.2. Functions of the positioner software
Functions I
• Activation via DIP switches
• Parameter setting via communications software
Additional function Effect
Sealing function
CUTOFF
Valve closes tight outside the control range. Specification
of the value (as %), from which the actuator is completely
deaerated (when 0 %) or aerated (when 100 %)
(see chapter “7.4. Function of the DIP switches”).
Correction line to adjust the operating characteristic
CHARACT
Linearization of the operating characteristic can be
implemented (see chapter “7.4. Function of the DIP
switches”).
Effective direction of the controller set-point value
DIR.CMD
Reversal of the effective direction of the set-point value
(see chapter “7.4. Function of the DIP switches”).
Table 3: Functions I
english
Type 8696