Dynasonics TFXM Series Ultrasonic Multi-Channel Flow Meter - Manual (Page 67)

Rev. 8/02
-3. 29- TFXM
DISPLAY LINES
Allows the selection of a two line or four line display format on
the graphics display module.
In 2 Line mode, the display will display flow measurements with
larger characters on the top half of the window and smaller
standard sized characters on the lower half of the window. In 4
Line mode, the display will display flow measurements with
standard sized characters on four lines in the window.
DISPLAY UNITS SELECTION
The (soft)SELECT key is used to conifgure the engineering
units on the graphics display—Press the (soft)SELECT key
from RUN mode to highlight the engineering unit presently
being displayed on the graphics display (pressing the SELECT
key multiple times will toggle the highlighted unit from line to
line). Use the UP/DOWN ARROW (soft)CHAN keys to select
display units of
?? RATE
?? TOTALizer
?? VELocity
?? SIGNAL STRength
?? Sound Speed
?? Temp 1
?? Temp 2
?? Temp Diff
PART 3 - KEYPAD CONFIGURATION
8. DSP MENU -- DISPLAY MENU
Display Units
Graphics
Display Mode