Dynasonics TFXM Series Ultrasonic Multi-Channel Flow Meter - Manual (Page 40)

Rev. 8/02
-3. 2- TFXM
After an installation of the transducer track or cradle assembly
and connection of appropriate power supplies to the TFXM,
keypad configuration of the instrument can be undertaken. All
entries are saved in non-volatile FLASH memory and will be
retained in the event of power loss.
The TFXM can be configured through the keypad interface or
by using the UltraLink Windows® software utility. Of the two
methods of configuration, the UltraLink software utility provides
more advanced features and offers the abililty to store and
transfer meter configurations between TFXM meters.
The following “Soft Key” menu items will be displayed
immediately above the two keys located in the lower corners of
the Graphics Display. See Figure 3.1.
PART 3 - KEYPAD CONFIGURATION
General
Keypad
Operation
Figure 3.1
Keypad Description
SOFT KEYS
INFRARED WINDOW
MEASUREMENT
CHANNEL SELECTION
ARROW KEYS