Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 163)

Class Series Programmer’s Manual 149
Appendix B
Sample Programs
‘C’ Language Program
The following sample ‘C’ program is included for reference. Figure B-1 shows the output generated
by this program.
/  DMX SERIES Sample C program  /
# include
main ()
{
char  pcs = “590”;
char  desc = “10K OHM 1/4 WATT”;
fputs (“DMX Printer Test Program\n”, stdout);
fputs (“\x02L\n”, stdaux); /  STX L – Enter Label Formatting  /
fputs (“H07\n” stdaux); /  Enter Heat Setting of 7  /
fputs (“D11\n”, stdaux); /  Set Width and Height Dot Size  /
fprintf (stdaux, “191108010000025%s\n”,desc);
/

Select smooth Font
 /
fprintf (stdaux, “1a6210000000050%sPCS\n”, pcs); /

Select Bar code type ‘a’
 /
fputs (“E\n”, stdaux); /  End Label format mode and print  /
}
10K OHM 1/4 WATT
Figure B-1: Sample Label